: Public <<interface>> Class
Created: 23.5.2022 18.05.10
Modified: 1.8.2022 13.54.15
Project:
Advanced:
A collection of two or more datums (or if geodetic or vertical, a collection of two or more reference frames) that are realizations of one Conventional Reference System and which for all but the highest accuracy requirements may be considered to be insignificantly different from each other.<br/><br/>Note: Within the datum ensemble every frame or datum is constrained to be a realization of the same reference system.<br/>
Attribute
Public DQ_PositionalAccuracy
  ensembleAccuracy
Details:
Notes: inaccuracy introduced through use of this collection of reference frames or datums<br/>Note: It is an indication of the differences in coordinate values at all points between the various realizations that have been grouped into this datum ensemble.<br/>
Element Source Role Target Role
«interface» Datum
Class   		Name:  
  		Name: datum
datum or reference frame which is a member of this datum ensemble
Details:
 
«interface» SingleCRS
Class   		Name: datumEnsemble
datum ensemble that is a component of this single coordinate reference system 		Name: referenceSystem
 
Details:
 
Constraint Type Status
datum ->forAll(p1, p2 | p1.conventionalRS=p2.conventionalRS) OCL Proposed
Details:
All instances shall have the same conventionalRS <br/><br/>
Property Value
isFinalSpecialization: 0
Object Type Connection Direction Notes
«interface» SingleCRS Class Weak To  
«interface» ObjectUsage Class Generalization To